Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Non-contact principle
• 1 Reed contakts
• Long life
• Flat design
• Actuating distance up to 60 mm depending on actuating magnet and version
• 44 mm x 13 mm x 9 mm
• Thermoplastic enclosure
• Actuating surface marked by protrusion

 
Preferred typ
 
Ordering details
 
Product type descriptionBN 80-01Z
Article number101082364
EAN Code4030661024035
eCl@ss27-27-01-04
 
Approval
 
Approval-
 
Global Properties
 
Permanent lightBN 80
Standards-
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)No
Active principleMagnetic drive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the cable mantlePVC
- Material of the active surfacePlastic
Housing construction formBlock
Weight25
Recommended actuatorBP 8, BP 10, 2 x BP 10, BP 15, 2 x BP 15, 2 x BP 34, BP 20, BP 31, BP 11, BP 12
 
Mechanical data
 
Design of electrical connectionCable
Cable length1
Conductors2 x 0,25
AWG-Number23
Mechanical life1.000.000.000 operations
Electrical lifetime5.000.000 operations
Actuating planesActuation from side
Active arealateral
Switch distance0 … 20
BP 8 = 0 … 5 mm
BP 10 = 2 … 9 mm
2 x BP 10 = 2 … 13 mm
BP 15 = 2 … 10 mm
2 x BP 15 = 2 … 15 mm
2 x BP 34 = 5 … 18 mm
BP 20 = 0 … 14 mm
BP 31 = 0 … 14 mm
BP 11 = 2 … 16 mm
BP 12 = 4 … 20 mm
- noticeActuating distance up to 20 mm depending on actuating magnet and version
Type of actuationMagnet
restistance to shock15 g, on sine wave oscillation
resistant to vibration15 g, on sine wave oscillation
Bounce duration0,5
Latching (Y/N)No
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+75
Protection classIP67
 
Electrical data
 
Design of control elementOpener (NC)
Number of shutters0
Number of openers1
Switching time - Close-
Switching time - Open0,07
Voltage type
Dielectric strength> 450 (50 )
Switching voltage250
Switching current0,5 A
Switching capacity10, 8
 
Outputs
 
Design of control outputReed contakts
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor44
- Height of sensor13
- Length of sensor9
 
notice
 
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
 
Included in delivery
 
Actuators must be ordered separately.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 15:57:38h Kasbase 3.3.0.F.64I