Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
• Metal enclosure • 4 or 6 Contacts • 194 mm x 123 mm x 130 mm (basic component) • 3 cable entries M 25 x 1.5 • Continuous adjustment of lever position 360°
All indications about the cable section are including the conductor ferrules.
Design of actuating element
Pull lever
Contact opening
2 x 4
Actuation direction
each time 60° right-hand side and left-hand side rotation
Actuating speed
- Min. Actuating speed
0,05
- Max. Actuating speed
3
Ambient conditions
Ambient temperature
- Min. environmental temperature
−30
- Max. environmental temperature
+90
Protection class
IP65 to IEC/EN 60529
Electrical data
Design of control element
Opener (NC)
- Change-over contact with double break
- galvanically separated contact bridges
Switching principle
Snap switch element
Number of shutters
0
Number of openers
3 left / 3 right
Rated impulse withstand voltage
6
Rated insulation voltage
500
Thermal test current
25 A
Utilisation category
AC-15: 230 V / 10 A
Max. fuse rating
25 A gG D-fuse
Dimensions
Dimensions of the sensor
- Width of sensor
250
- Height of sensor
123
- Length of sensor
158
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
18.02.2019 -
22:50:20h Kasbase 3.3.0.F.64I