Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
VÖ  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  

Datasheet Datasheet

Click to enlarge image
• Design M30
• Thermoplastic enclosure
• AC 2-wire
• Double-insulated

 
 
Ordering details
 
Product type descriptionIFL 15-300-10T - Ordering suffix
Article number101060609
EAN Code4030661047904
eCl@ss27-27-01-01
 
Approval
 
Approval CCC
 
Global Properties
 
Permanent lightIFL - M30
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
Materials
- Material of the housingsPlastic
- Material of the nutsPlastic
- Material of the washerperbunan®
- Material of the cable mantlePVC
- Material of the active surfacePlastic
Housing coatingNone
Housing construction formcylinder, thread
Weight128
 
Mechanical data
 
Design of electrical connectionCable H03VV-F
Cable length2
Conductor with strain reliefYes
Conductors2 x 0,5
mechanical installation conditionsnot flush
Switch distance Sn15 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 36 max. 400 Ncm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of wire2
Voltage typeAC, alternating current
Supply voltage UB
- Min. supply voltage15
- Max. supply voltage250
Rated supply frequency45 … 65
Switch frequencyapprox. 10 HZ
Voltage drop Udapprox. 4.5 V (250 V / 200 mA)
Rated impulse withstand voltage Uimp4 kV
Residual current Ir1 mA
Minimum operating current Im10 mA
Operating current Ie500 mA
 
Outputs
 
Design of control outputTwo-wire
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor98
- Diameter of sensorM30
 
notice
 
Instead of nuts, a mounting clamp can be provided.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: IFL 15-300-10T-1522
...-1522 Operating current Ie: max. 150 mA
Voltage drop Ud: approx. 7.5 V (150 mA)
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 08:13:21h Kasbase 3.3.0.F.64I