Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
• Metal enclosure • 118 mm x 155 mm x 64 mm ( basic component) • With large after-travel • Actuator head with captive stainless steel ball actuator • 2 cable entries M 20 x 1.5
All indications about the cable section are including the conductor ferrules.
Design of actuating element
Plunger
Bounce duration
Switchover time
Contact opening
2 x 6
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed
1
- Max. Actuating speed
1
- Actuating angle
20
Ambient conditions
Ambient temperature
- Min. environmental temperature
−30
- Max. environmental temperature
+90
Protection class
IP65 to IEC/EN 60529
Electrical data
Design of control element
Normally open contact (NO)
- with double break
Switching principle
Creep circuit element
Number of shutters
3
Number of openers
0
Rated impulse withstand voltage
6
Rated insulation voltage
400
Thermal test current
16 A
Utilisation category
AC-15: 400 V / 4 A
Max. fuse rating
16 A gG D-fuse
Dimensions
Dimensions of the sensor
- Width of sensor
118
- Height of sensor
217
- Length of sensor
64
Slide diameter
10
notice
notice
Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch.
Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: T2S 461-30Y- 1276-2
...- 1276-2
gold-plated contacts
...- H
Slow action with staggered contacts
...- Q
Available with bellows to protect against heavy soiling
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
18.02.2019 -
13:10:23h Kasbase 3.3.0.F.64I