Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
VÖ  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  

Datasheet Datasheet

Click to enlarge image
• Non-contact principle
• 1 Reed contakts
• Long life
• Actuating surface and direction of actuation marked by switch symbol
• 85 mm x 26 mm x 24 mm
• Thermoplastic enclosure
• Actuating distance up to 55 mm depending on actuating magnet and version
• Spade connector

 
 
Ordering details
 
Product type descriptionBN 32-10
Article number101057228
EAN Code4030661025124
eCl@ss27-27-01-04
 
Approval
 
Approval-
 
Global Properties
 
Permanent lightBN 32
Standards-
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)No
Active principleMagnetic drive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the active surfacePlastic
Housing construction formBlock
Weight60
Recommended actuatorBP 10, 2 x BP 10, BP 15, 2 x BP 15, 2 x BP 15/2, BP 34, BP 20, BP 31, BP 11, BP 12, BP 21, BE 20
 
Mechanical data
 
Design of electrical connectionFlat plug-in connector 4.8 mm
Mechanical life1.000.000.000 operations
Electrical lifetime1.000.000 … 1.000.000.000 operations
Switching frequency300/
Actuating planesActuation from side
Active arealateral
Switch distance5 … 40
BP 10 = 5 mm
2 x BP 10 = 12 mm
BP 15 = 6 mm
2 x BP 15 = 12 mm
2 x BP 15/2 = 12mm
BP 34 = 15 mm
BP 20 = 15 mm
BP 31 = 15 mm
BP 11 = 5 ... 15 mm
BP 12 = 10 ... 25 mm
BP 21 = 20 ... 40 mm
BE 20 = 15 mm
- noticeActuating distance up to 40 mm depending on actuating magnet and version
Type of actuationMagnet
restistance to shock-
resistant to vibration15 g, on sine wave oscillation
Bounce duration0,3 … 0,6
Latching (Y/N)No
Actuating speed18
Switching point accuracy± 0,25 mm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+90
Protection classIP67
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of shutters1
Number of openers0
Switching time - Close0,3 … 1.5
Switching time - Open-
Voltage type
Dielectric strength> 600 (50 )
Switching voltage250
Switching current3 A
Switching capacity120 /
 
Outputs
 
Design of control outputReed contakts
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor85
- Height of sensor26
- Length of sensor24
 
notice
 
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
 
Included in delivery
 
Actuators must be ordered separately.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 24.05.2019 - 02:58:00h Kasbase 3.3.0.F.64I