Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• With pre-wired cable
• Non-contact principle
• Long life
• Actuation from front
• Actuating surface and direction of actuation marked by switch symbol
• without bias magnet
• Construction form Ø 13 mm
• Thermoplastic enclosure
• Actuating distance up to 60 mm depending on actuating magnet and version
• with central mounting

Ordering details
Product type descriptionBN 65-10Z/1V
Article number101057096
EAN Code
Global Properties
Permanent lightBN 65
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)No
Mountingcentral with threated flange
Active principleMagnetic drive
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the cable mantleH03VV-F
Housing construction formcylinder smooth
Recommended actuatorBP 10S, 2 x BP 10S, BP 15S, BP 34S, BP 20S, BP 31S, BP 11S, 2 x BP 11S, BP 12S, 2 x BP 12S, BP 21S, 2 x BP 21S, BP 22S, 2 x BP 22S, BE 20S
Mechanical data
Design of electrical connectionCable
Cable length1
Conductors2 x 0,75
Mechanical life1.000.000.000 operations
Electrical lifetime1.000.000 … operations
Switching frequency300/
Actuating planesfront side
Active areafront side
Switch distance5 … 55
BP 10S = 5 mm
2 x BP 10S = 10 mm
BP 15S = 6 mm
BP 34S = 20 mm
BP 20S = 15 mm
BP 31S = 15 mm
BP 11S = 5 mm
2 x BP 11S = 15 mm
BP 12S = 10 mm
2 x BP 12S = 25 mm
BP 21S = 30 mm
2 x BP 21S = 20 … 55 mm
BP 22S = 25 mm
2 x BP 22S = 15 … 55 mm
BE 20S = 6 mm
noticeActuating distance up to 55 mm depending on actuating magnet and version
Type of actuationMagnet
restistance to shock30 g, on sine wave oscillation
resistant to vibration30 g, on sine wave oscillation
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Bounce duration0,3 … 0,6
Latching (Y/N)No
bias magnet (Y/N)No
Tightening torque for nuts22 300
Actuating speed18
Switching point accuracy± 0,25 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+75
Protection classIP67
Electrical data
Design of control elementNormally open contact (NO)
Number of shutters1
Number of openers0
Switching time - Close0,3 - 1.5
Switching time - Open-
Dielectric strength> 600 (50 )
Switching voltage250
Switching current3 A
Switching capacity120 /
Design of control outputReed contakts
LED switching conditions display
LED switching conditions display (Y/N)No
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Length of sensor103
- Diameter of sensor13
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).
This does not apply to the bistable contact.
Included in delivery
Actuators must be ordered separately.

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 21:11:53h Kasbase 3.3.0.F.64I