Datasheet - T2L 035-20Z - 101056298 - eclass 27270601 27-27-06-01

Home

Position switch

heavy Position switch

035

035 Roller lever 2L

T2L 035-20Z

Add Product to the basket.

T2L 035-20Z

Datasheet

• Metal enclosure
• 58 mm x 142 mm x 61,5 mm (basic component)
• 3 cable entries M 25 x 1.5
• operating shaft with ball bearings
• Protection class IP67
• Actuator head can be repositioned in steps 4 x 90°



Ordering details

Product type description	T2L 035-20Z - Ordering suffix
Article number	101056298
EAN Code	4030661016269
eCl@ss	27-27-06-01

Approval

Approval	EAC CCC

Global Properties

Permanent light	035 Rollenhebel 2L
Standards	EN 60947-5-1
Compliance with the Directives (Y/N)	Yes
Suitable for safety functions (Y/N)	No
Standard housing (Y/N)	No
Materials
- Material of the housings	cast iron, galvanized
- Roller material	Metal film
- Material of the contacts	Silver
Housing coating	painted
Weight
Slide form	Castor

Mechanical data

Design of electrical connection	Screw connection
Cable section
- Min. Cable section	1.5
- Max. Cable section	2.5
AWG-Number	13
Active principle	mechanical
Mechanical life	10.000.000 operations
Switching frequency	max. 3000 /h
notice	All indications about the cable section are including the conductor ferrules.
Design of actuating element	Roller lever
Bounce duration
Switchover time
Contact opening	2 x 2.5
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed	1
- Max. Actuating speed	1
- Actuating angle from left of switch axis	30
- Actuating angle from right of switch axis	30

Ambient conditions

Ambient temperature
- Min. environmental temperature	−30
- Max. environmental temperature	+90
Protection class	IP67 to IEC/EN 60529

Electrical data

Design of control element	Normally open contact (NO)
- with double break
Switching principle	Creep circuit element
Number of shutters	2
Number of openers	0
Rated impulse withstand voltage Uimp	6 kV
Rated insulation voltage Ui	400 V
Thermal test current Ithe	10 A
Utilisation category	AC-15: 400 V / 4 A
Max. fuse rating	20 A gL/gG D-fuse

Dimensions

Dimensions of the actuators
- Width of the actuator	36
- Height of the actuator	73
- Length of the actuator	21
Roller wide	8
Roller diameter	36

Switch travel diagram

Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel

Ordering suffix

The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: T2L 035-20Z- C
...- C	Magnetic blow-out Blow-out magnets available to switch high DC currents Rated operating current/voltage Ie/Ue: 1 A / 220 V; 4 A / 24 V Utilisation category: DC-13

...- H	Slow action with staggered contacts


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 26.05.2019 - 07:26:43h Kasbase 3.3.0.F.64I