Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Solenoid interlock  ->  AZM190  ->  AZM190-02/01RK-230VAC
 Add Product to the basket. 
• Thermoplastic enclosure
• Long life
• Interlock with protection against incorrect locking.
• 89 mm x 178 mm x 41 mm
• Actuating head can be repositioned by 4 x 90°
• 2 cable entries M 20 x 1.5
• Wiring compartment
• Slim design, particularly suitable for fitting on hinged doors, aluminium profiles and fencing
• Sealing mechanism to prevent the ingress of dirt
• Cut clamp termination
• Manual release

Ordering details
Product type descriptionAZM190-02/01RK-230VAC
Article number101182119
EAN Code4030661451657
Replaced article number 101178003

StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
B10d Normally open contact (NO)1.000.000
Mission time20 Years
Global Properties
Permanent lightAZM190
StandardsEN 60947-5-1, BG-GS-ET-19
Compliance with the Directives (Y/N) Yes
Number of actuating directions4
Active principleelectromechanical
Duty cycle EDMagnet 100 %
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the contactsSilver
Housing coatingNone
Mechanical data
Connection typeScrew connection
Cable section
- Min. Cable section1 x 0,5 mm²
- Max. Cable section1 x 1.5 mm²
Mechanical life2.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
Emergency unlocking device (Y/N)No
- front
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force20 N
Positive break force20 N
positive break travel2 x 3.5 mm
Clamping force F1950 N
Ambient conditions
Ambient temperature
- Min. environmental temperature0 °C
- Max. environmental temperature+50 °C
Protection classIP67 to IEC/EN 60529
Electrical data
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts0
Number of safety contacts3
Power to unlockYes
Power to lockNo
Rated control voltage230
Power consumptionmax. 8.5 W
Power consumptionmax. 8.5 W
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe4 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 4 A
Max. fuse rating4 A gG D-fuse to DIN EN 60269-1
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Miscellaneous data
Applications hinged safety guard
Dimensions of the sensor
- Width of sensor89 mm
- Height of sensor178 mm
- Length of sensor41 mm
Manual release
• For manual release using triangular key M3 (included in delivery)
• For maintenance, installation, etc.

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 28.02.2020 - 00:11:39h Kasbase 3.3.0.F.64I