17.01.2018 - 08:07:51h

[Schmersal LOGO]Datasheet - ZR 335-11z
Position switch / 335 Metal enclosure - DIN EN 50041 with Actuator / 335 Roller plunger r

Preferred typ

(Minor differences between the printed image and the original product may exist!)

• Metal enclosure
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 40,5 mm x 76 mm x 38 mm
• Snap action with constant contact pressure up to switching point
• Actuator heads can be repositioned by 4 x 90°
• 1 Cable entry M 20 x 1.5
• Design to EN 50041
 
Ordering details
Product type descriptionZR 335-11Z
Article number101154447
Strobe lamp4030661172286
eCl@ss27-27-26-01
 
Approval
Approval

 
Classification
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)20.000.000
Mission time20 Years
notice
 
Global Properties
Permanent lightZ 335 Rollendruckbolzen R
StandardsEN 60947-5-1, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
Actuator typeC to EN 50041
Materials
- Material of the housingsAluminium
- Material of the contactsSilver
Housing coatingpainted
Housing construction formNorm construction design
Weight135
 
Mechanical data
Design of electrical connectionScrew connection
Cable section
- Min. Cable section0,75
- Max. Cable section2.5
Mechanical life30.000.000 operations
Switching frequency5000
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRoller plunger
Actuating force12
Bounce durationin accordance with actuating speed
Switchover time< 2
Actuating speed with actuating angle 30° to switch axis
- Min. Actuating speed
- Max. Actuating speed0,5
 
Ambient conditions
Ambient temperature
- Min. environmental temperature−30
- Max. environmental temperature+80
Protection classIP67
 
Electrical data
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleSnap switch element
- positive break NC contact
Number of auxiliary contacts1
Number of safety contacts1
Rated impulse withstand voltage6
Rated insulation voltage500
Thermal test current10 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 4 A
Required rated short-circuit current1000 A
Max. fuse rating6 A gG D-fuse
 
ATEX
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
Dimensions of the sensor
- Width of sensor40.5
- Height of sensor116.6
- Length of sensor38
 
Diagram


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: ZR 335-11z-1637
...-1637 0,3 µm gold-plated contacts

...-NPT Cable entry NPT 1/2“

...-ST M12 connector with A-coding
Rated impulse withstand voltage Uimp: 0,8 kV
Rated insulation voltage Ui: 50 V
Rated operating voltage Ue: 50 V
Operating current Ie: 4 A
Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.

...-2310 M12 connector with B-coding
Rated impulse withstand voltage Uimp: 0,8 kV
Rated insulation voltage Ui: 50 V
Rated operating voltage Ue: 50 V
Operating current Ie: 4 A
Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.

 
Ordering code
(1)(2) 3(3)5-(4)Z(5)-(6)-(7)-(8)-(9)
 
(1)
ZSnap action
TSlow action
 
(2)
SPlunger S
RRoller plunger R
HRoller lever H
10HRod lever 10H
7HRoller lever 7H
1KOffset roller lever 1K
3KAngle roller lever 3K
 
(3)
3slim design
5large design
 
(4)
111 Normally open contact (NO) / 1 Opener (NC)
022 Opener (NC)
202 Normally open contact (NO) (Switch with 2 NO contacts are not for security tasks)
01/011 Opener (NC) left / 1 Opener (NC) right
121 Normally open contact (NO) / 2 Opener (NC)
033 Opener (NC)
 
(5)
HSlow action with staggered contacts
UESlow action with overlapping contacts
 
(6)
G24with LED
 
(7)
withoutCable entry M20
NPTcable entry NPT 1/2"
STM12 connector with A-coding (Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.)
ST-2310M12 connector with B-coding (Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.)
 
(8)
2138Roller lever 7H for Position switches with safety function
 
(9)
1637gold-plated contacts
 
 
Documents
Operating instructions and Declaration of conformity (br) 335 kB, 01.03.2017
Code: ace_mrl_zt332-335-336-355_br
 
Operating instructions and Declaration of conformity (de) 318 kB, 18.03.2016
Code: mrl_zt332-335-336-355_de
 
Operating instructions and Declaration of conformity (it) 329 kB, 25.07.2016
Code: mrl_zt332-335-336-355_it
 
Operating instructions and Declaration of conformity (fr) 336 kB, 25.07.2016
Code: mrl_zt332-335-336-355_fr
 
Operating instructions and Declaration of conformity (nl) 321 kB, 04.04.2013
Code: mrl_zt332-335-336-355_nl
 
Operating instructions and Declaration of conformity (jp) 172 kB, 12.05.2017
Code: mrl_zt332-335-336-355_jp
 
Operating instructions and Declaration of conformity (cs) 371 kB, 07.10.2014
Code: mrl_zt332-335-336-355_cs
 
Operating instructions and Declaration of conformity (pt) 338 kB, 25.07.2016
Code: mrl_zt332-335-336-355_pt
 
Operating instructions and Declaration of conformity (es) 333 kB, 10.02.2017
Code: mrl_zt332-335-336-355_es
 
Operating instructions and Declaration of conformity (da) 323 kB, 04.04.2013
Code: mrl_zt332-335-336-355_da
 
Operating instructions and Declaration of conformity (en) 352 kB, 18.03.2016
Code: mrl_zt332-335-336-355_en
 
Operating instructions and Declaration of conformity (pl) 369 kB, 25.07.2016
Code: mrl_zt332-335-336-355_pl
 
CCC certification (en) 187 kB, 03.08.2015
Code: q_347p02
 
CCC certification (cn) 166 kB, 03.08.2015
Code: q_347p03
 
EAC certification (ru) 844 kB, 05.10.2015
Code: q_6037p17_ru
 
 
Images
1_335g01
Dimensional drawing (basic component)
 

1r336g01
Dimensional drawing (actuator)
 

_235rz01
Operating principle
 

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 17.01.2018 - 08:07:51h Kasbase 3.3.0.F.64I
Print and output options

Print Print

Create PDF Create PDF

 Create EXCEL file

Print and output options

Select all | Hide all