Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Dansk  Polska  日本語  Türkiye  中文  Português-br  
 
Search
  
• thermoplastic enclosure
• Good resistance to oil and petroleum spirit
• Wide range of alternative actuators
• 30 mm x 58,5 mm x 30 mm
• Snap action with constant contact pressure up to switching point
• 1 Cable entry M 20 x 1.5
• Double-insulated
• Mounting details to EN 50047
• Actuator heads can be repositioned by 4 x 90°

 
Preferred typ
 
Ordering details
 
Product type description ZS 236-11Z - Ordering suffix
Article number 101153775
EAN code 4030661169712
 
Approval
 
Approval USA/CAN
CCC
GOST
 
Classification
 
Standards ISO 13849-1
B10d Normally-closed contact (NC) 20.000.000
Mission time 20 Years
notice
 
Global Properties
 
Product name Z 236 Druckbolzen S
Standards IEC 60947-5-1, ISO 13849-1, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N) Yes
Actuator type B to EN 50047
Materials
- Material of the housings Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the contacts Silver
Housing coating None
Housing construction form Norm construction design
Weight 52 g
 
Mechanical data
 
Design of actuating element Plunger
Design of electrical connection Screw connection
Cable section
- Min. Cable section 1.5 mm²
- Max. Cable section 2.5 mm²
Mechanical life 20.000.000 operations
Switching frequency max. 5000/h
notice All indications about the cable section are including the conductor ferrules.
Actuating force min. 9 N
Bounce duration < 3 ms
Switchover time < 5.5 ms
Positive break force 19 N
Actuating speed for vertical actuation
- Min. Actuating speed 10 mm/min
- Max. Actuating speed 1 m/s
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature −30 °C
- Max. environmental temperature +80 °C
Protection class IP67
 
Electrical data
 
Design of control element Normally open contact (NO), Opener (NC)
Switching principle Snap switch element
- positive break NC contact
Number of auxiliary contacts 1 piece
Number of safety contacts 1 piece
Rated impulse withstand voltage Uimp 6 kV
Rated insulation voltage Ui 500 V
Thermal test current Ithe 10 A
Utilisation category AC-15: 230 V / 4 A,
DC-13: 24 V / 1 A
Required rated short-circuit current 1000 A
Max. fuse rating 6 A gG D-fuse
 
Dimensions
 
Dimensions of the sensor
- Width of sensor 30 mm
- Height of sensor 73.5 mm
- Length of sensor 30 mm
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: ZS 236-11Z-1637
...-1637 0,3 µm gold-plated contacts

...- ID IDC method of termination

...-NPT Cable entry NPT 1/2“

...-1297 Enclosure with transverse slotted holes

...-ST M12 connector with A-coding
Rated impulse withstand voltage Uimp: 0,8 kV
Rated insulation voltage Ui: 50 V
Operating current Ie: AC-15: 50 V / 4 A
Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.

...-2310 M12 connector with B-coding
Rated impulse withstand voltage Uimp: 0,8 kV
Rated insulation voltage Ui: 50 V
Operating current Ie: AC-15: 50 V / 4 A
Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 24.10.2014 - 15:23:27h Kasbase 2.2.18.F DBI