Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Solenoid interlock  ->  AZM 161  ->  AZM 161SK-12/12RKA-024
 Add Product to the basket. 
AZM 161SK-12/12RKA-024
• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Manual release
• cable entries 4 M 16 x 1.5
• 4 cable entries M 16 x 1.5

 
Preferred typ
 
Ordering details
 
Product type descriptionAZM 161SK-12/12RKA-024 - Ordering suffix
Article number101166285
Strobe lamp4030661213972
eCl@ss27-27-26-03
 
Approval
 
Approval


 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightAZM 161
StandardsEN 60947-5-1, BG-GS-ET-19
Compliance with the Directives (Y/N) Yes
Number of actuating directions3
Active principleelectromechanical
Duty cycleMagnet 100
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the contactsSilver
Housing coatingNone
Weight460
 
Mechanical data
 
Actuating play in direction of actuation5.5
Design of electrical connectionScrew connection
Cable section
- Min. Cable section1 x 0,25
- Max. Cable section1 x 1.5
Mechanical life> 1.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Positive break force20
positive break travel10
Clamping force2000
Max. Actuating speed2
Actuating frequency1000 /
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts2
Number of safety contacts4
Power to unlockNo
Power to lockYes
Rated control voltage24
Power consumption10
Rated impulse withstand voltage4
Rated insulation voltage250
Thermal test current6 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 2,5 A
Required rated short-circuit current1000 A
Max. fuse rating6 A gG D-fuse To DIN EN 60269-1
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Miscellaneous data
 
Applications sliding safety guard,
removable guard,
hinged safety guard
 
Dimensions
 
Dimensions of the sensor
- Width of sensor130
- Height of sensor90
- Length of sensor30
 
notice
 
Manual release
• For maintenance, installation, etc.
• For manual release using M5 triangular key, available as accessory
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZM 161SK-12/12RKA-024G
...G Protected against incorrect polarity and voltage spikes.
limited terminating space 0,75 mm²
Diagram
14 guard open
13 +24 VDC
63 0 VDC
64 unlocked



K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.01.2018 - 16:15:16h Kasbase 3.3.0.F.64I