Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Safety sensors  ->  BNS 16  ->  BNS 16-12ZV
• thermoplastic enclosure
• Suitable for food processing industry
• Concealed mounting possible
• 52 mm x 90 mm x 32 mm
• Long life
• Insensitive to transverse misalignment
• no mechanical wear
• Insensitive to soiling
• 3 cable entries M 20 x 1.5
• Wiring compartment

Preferred typ
Ordering details
Product type description BNS 16-12ZV
Article number 101172553
EAN code 4030661301129
eCl@ss 27-27-24-02
Approval BG
Standards EN ISO 13849-1
B10d Opener/Normally open contact (NC/NO) 25.000.000
- notice at max. 20% contact load
Mission time 20 Years
Global Properties
Product name BNS 16
Standards IEC 60947-5-3, BG-GS-ET-14
Compliance with the Directives (Y/N) Yes
- Material of the housings Plastic, glass-fibre reinforced thermoplastic
Weight 125 g
Coding available (Y/N) Yes
Monitoring function of downstream devices (Y/N) No
Prerequisite evaluation unit Yes
Recommended safety-monitoring module AES 1135, AES 1136, AES 1165, AES 1166, AES 1165-2250, AES 1185, AES 1235, AES 1236, AES 1265, AES 1266, AES 1337, AES 2135, AES 2136, AES 2335, AES 2336, AES 2535, AES 2536, AES 2365, AES 2366, AES 2565, AES 2566, AES 2285, AES 3075, SRB 202C., SRB 400C.
Recommended actuator BPS 16
Mechanical data
Design of electrical connection Screw connection
Cable section
- Min. Cable section 0,25 mm²
- Max. Cable section 1.5 mm²
mechanical installation conditions not flush
Active area front side
Ensured switch distance ON 8 mm
Ensured switch distance OFF 18 mm
notice All indications about the cable section are including the conductor ferrules.
Type of actuation Magnet
Direction of motion head-on with regard to the active surface
restistance to shock 30 g / 11 ms
Resistance to vibration 10 … 55 Hz, Amplitude 1 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature −25 °C
- Max. environmental temperature +70 °C
Storage and transport temperature
- Min. Storage and transport temperature −25 °C
- Max. Storage and transport temperature +70 °C
Protection class IP67
Electrical data
Integrated Safety monitoring module available (Y/N) No
Cross circuit/short circuit recognition possible (Y/N) Yes
Voltage type VAC/DC
Switch frequency max. 5 Hz
Switching voltage max. 100 VAC/DC
Switching current max. 400 mA
Switching capacity max. 10 W
Design of control output Other, Reed contakts
Number of shutters 1 piece
Number of openers 2 piece
Electrical data - Safety outputs
Number of secure semi-conductor outputs 0 piece
Number of secure outputs with contact 0 piece
Electrical data - Diagnostic output
Number of semi-conductor outputs with signaling function 0 piece
Number of outputs with signaling function that already have a contact 0 piece
LED switching conditions display
LED switching conditions display (Y/N) No
Explosion protection categories for gases None
Explosion protected category for dusts None
Dimensions of the sensor
- Width of sensor 52 mm
- Height of sensor 90 mm
- Length of sensor 39 mm
Contact symbols shown for the closed condition of the guard device.
Included in delivery
Actuators must be ordered separately.

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 25.01.2015 - 17:16:42h Kasbase 3.1.2.F.64I